Call for a Quote: 778.831.0385
Port Moody Painters | Abbott Painters

INSL-X

Cabinet Coat perfect for delivering a smooth finish when you wish to refurbish trim, cabinets, bathroom vanities, furniture and crown molding. This item is ideal for jazzing up hard materials due to its excellent adhesion. It can be successfully used on polyurethane or varnish surfaces and can even be applied with no primer. This semi-gloss remedy levels and flows to produce an extremely durable surface.



Preparation for Surfaces

To discover the best results, surface locations must be correctly prepared. Every surface must be clean and dry and free from contaminants such as mold, oil, grease, polish, or dirt. Employ soapy, warm water to wash away any dirt or chalk with a bit of gentle cleansing. To get rid of surface wax, use a commercial wax stripper. Choose a grease or oil emulsifier to take care of slick applications.

Preparing the item is time-consuming; however, it will considerably improve your end result. Clean previously painted places by eliminating all chipping, cracking and peeling loose paint. Sand your surface with some help from hand-scraping tools, sanders, electric grinders and wire brushes to remove debris. All metal regions need to be free from chips, oxidation and mill scale. All working surface locations that are damaged or delaminated have to be repaired or totally exchanged.

Next, lightly sand the rough paint edges alongside the surface area. Scuff up any existing sheen and lightly dull any polished locations to produce better adhesion. Any dust and debris need to be cleaned after sanding.

Application

Cabinet Coat can easily be applied with a roller or a paintbrush. Some people would rather spray and use the HVLP option. It is vital to stir the product well before applying. Make an effort to keep a wet paint edge while you apply by brushing or rolling into areas that were coated previously. This product cures very fast and may possibly show brush marks or roller marks if the product is over-saturated. For best results, apply Cabinet Coat as soon as the surface and ambient temperatures are more than 50 degrees F and less than 90 degrees F. Don’t utilize this product if there is any likelihood of moisture touching down on the wet paint.



Clean Up Practices

Once you are done painting, use soapy, warm water to clean. Immediately wash your hands and let your paint tools including brushes and rollers soak. Ensure proper soap water disposal follows the safety guidelines. Consult your local recycling centre to determine if they take dry or empty paint containers. Do your homework to find out what your local disposal specifications are with your sanitation division. Check on disposal options with your ecological department.

Environmental Health & Safety Information

Precise air circulation is essential at all times. Avoid inhaling the spray mist or sanding dust every time. A fresh air entry is essential for safe application and drying. Do not have any exposure to skin, or eyes. An authorized NIOSH respirator is recommended for applying, clean up and sanding processes to shield you from dust and spray mist. Ensure correct respirator use by following instructions from the manufacturer. Keep the reservoir closed after each use. Before and after handling, wash your hands.



Know the FIRST AID Requirements Before Using

Wash your eyes a minimum of fifteen minutes if any exposure occurs. In case any product touches your skin, depend on soap and water to clean up it away. Promptly seek medical assistance if required. In the instance of breathing difficulty, get to fresh air ASAP and seek medical help if needed.

Call Us Today
778.831.0385

1014 Gatensbury Rd, Port Moody, BC, V3H 2P2


Articles & Resources

What is the best Paint Tray Liner What is the best Paint Tray Liner
How to use Silicone Sealants How to use Silicone Sealants
Picasso Paint Brushes Port Moody Picasso Paint Brushes Port Moody